loading.gif
Notes
Login Sign Up Shopping Cart 简体中文
Add to my favorite categories
category O Gauge
Path Yahoo Bid > Toys & Games > Model Trains > O Gauge
Remarks
Add my favorite keywords
Keywords
category O Gauge
Remarks
Join my favorite seller
Seller ES5mF***
Remarks
Add to my blacklist seller
Seller ES5mF***
Remarks
Yahoo Bid Toys & Games Model Trains O Gauge
(くー9) ”EF58 21”カツミ 真鍮製:昭和20年代のメーカー特別仕様完成品ですが、現状はジャンク:組み立て要す。 Oゲージ(1/45・32mm)
        

  • Product Quantity
    : 1
  • Starting Bid
    :3,000円
  • Highest Bidder
    : しじみ / Rating:196
  • Listing Date
    :2026年04月13日 00時08分
  • Bidding closes on
    :2026年04月19日 21時02分
  • Auction Number
    :d1226302901
  • Condition
    :Damaged and stained (specify in description)
  • Automatic Extension
    :Yes
  • Authentication
    :No
  • Early Closing
    :Yes
  • Can I return the product?
    :no
  • Description
  • Q&A ()
  • Cost Estimator
  • Problem Item Response Procedur
Notes
  1. Faulty product, please pay attention before subscribing
  2. Freight charges cash on delivery
  3. The seller does not provide return compensation and other responsibilities
  4. The page has a fragile description, and fragile items cannot be shipped by sea. They can only be shipped by air. If the goods are not fragile, they can be shipped by air.
  5. The product may be dented or collapsed, please ask clearly and pay attention before placing a bid.
  このお品はお客様よりのご依頼で、出品させていただきます。 (くー9)
    ・
   ・・・お客様のご依頼で出品させていただきましたお品につき、この商品のアフター・ケアーなどはできません。
         ・・・限られた少ない時間での観察です。
            商品のすべてを把握しているわけではございません。
            説明文の不足や誤りがございました場合は、現物の現状優先とお考えください。
          ・
      ご理解いただける方のみ、ご入札をお願いいたします。
            私は、気持ちの良いお取引を望んでおります。
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
   今日では、希少なお品です。 
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
とてもとても古いOゲージ(1/45・32mm) カツミ模型店 ”特別製品”  
                      真鍮製 EF58旧型 電気機関車(デッキ付き、箱型車体)です。 
                      現状は、完成品ではございません。 
                      現状は、経年なりの姿で、ボデー・台車・モーターなどのパーツに分解されています。 
                        オーバーホール、再組立てが必要です。 
     ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
    機関車の大きさ 全長 46cm 位 幅 6.2cm 位です。 
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
本商品は、昭和20年代半ば~後半頃に、メーカー(カツミ模型店)により、
   特別に製作された、 ”DX仕様”特注メーカー完成品では、と思われます。 
    ・・・当時の、通常のメーカー塗装済完成品とは異なり、かなりグレードアップが施され、
       当時としては最高レベルの製品として、完成されていました。 
    ・・・当時のメーカーの手で、ハンダ付けで組み立てられ、吹き付け塗装が施されています。 
       かなり劣化は見られるものの、昭和20年代のたいへん貴重な塗装が残されています。  
           ・
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
中古品です。・・・たいへん古いお品です。
  ベースとなっている製品(EF58キット)は、昭和20年代前半頃(1948年~1950年頃)のお品だと思います。 
           EF58としては、初期の製品を、グレードアップして、昭和20年代後半頃に特製品として、完成させたようです。 
   ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
   機関車はAC3線式仕様で完成されていましたが、現状では、動輪は、2線式にも対応できるように、片側絶縁車輪に交換されています。  
     約70年も昔のお品です。 
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
  本製品は、おそらく、当時のカツミにより、特別仕様の組み立て・塗装を施された、 
  たいへん貴重な ”特別仕様のメーカー塗装済完成品”では?と思われます。 
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
       当時(60~70年昔)の模型店では、大型EF級電機(本製品)や大型蒸機(C62など)などは、
       通常、ほとんどが、真鍮生地キット(モーター未取り付け)で販売されていたようです。 
        
         ・・・当時は、物品税がたいへん高く、塗装済メーカー完成品にすると、たいへん高価になってしまい、
            特別の注文以外は、すべて、「生地・組み立て済キット」で販売されていたと聴いています。 
          ・・・・・・・・・・・・・・・・・・・  
       そのような時代ですが、ごく一部の製品に、メーカーにより組み立て・塗装を施されたメーカー完成品も、存在しました。
       当時の百貨店や、特別のお金持ちの愛好家の特別注文で製作されました。 
       このメーカー完成品には、”通常仕様”と”DX仕様”があったようです。 
         ・・・DX仕様は、注文時の金額により、様々な仕様で創られたようです。 
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 本商品は、特別の ”DX仕様”特注メーカー完成品では、と思われます。 
    通常のメーカー塗装済完成品とは異なり、かなりグレードアップが施され、
    当時としては最高レベルの製品として、完成されています。 
       ・・・・・・・・・・・・・・・・・・・・
    本商品のDX仕様の特徴としては 
        ・・・(1)ボデー全体の仕上げが、たいへん丁寧に、美しく仕上げられています。 
               ・
              カツミ製:EF58旧型の一般製品の大きな欠点は、ボデー前面と側面部の接合部の仕上げにあります。  
              一般の製品では、この接合部のやすり仕上げが荒く、角があり、見苦しい仕上げで創られていました。 
              本製品の「接合部」はたいへん丁寧に仕上げられ、なめらかで美しい曲線となっています。  
              ボデー部に、新たに製作したパーツを付け、補強されています。 
              ・・・ボデー部はすこぶる頑丈で、しっかりとした創りになっています。
                  (もともとはプレスの真鍮薄板材で創られていて、強度に乏しく、不満足な構造でした。) 
                           (2)EF58の初期製品は、側面窓が中央2枚窓仕様で創られました。 
             EF58実車の改造が行われ、新たに中央窓が開けられ3枚窓となり、これに伴って、 
             本製品におきましても、中央窓が開けられました。・・・本製品の中央窓はメーカーにより、開けられた窓です。 
           (3)屋根上の2個のモニター部パーツも、新たに「プレスパーツ」を製作して取り付けています。  
               (一般製品では、角張った安っぽいモニターパーツが付いています。)  
              ・
           (4)台枠部、真鍮鋳物バネパーツに交換されて、外観にこだわって製作されています。 
                ・・・バネ・イコライザーはダミーとなっています。 
               (一般製品では、リン青銅バネがイコライザーに接続され、可動仕様となっていました。  
                ただし、バネとイコライザーの接続が、当時の製品ではかなり安直な作りだったために、 
                効果的な可動仕様とは言えない製品がほとんどでした。 
                本製品では、「不確実な可動」はあきらめて、実感的な外観を重視して、ダミーのバネに交換したようです。)  
                軸箱自体は固定されていませんので、多少は動くように作られていたようですが、
                現状では、軸箱の素材が劣化していて、動かなくなっています。  
             動輪の脇には、ブレーキが付けられ、ブレーキロッドも付けられています。・・・これも一般製品にはありません。 
              ・
(5)特筆すべきは、先台車です。・・・真鍮板よりの”スクラッチビルドで創られた「鋳鋼先台車」”が付けられています。 
                後年発売された製品、「EF58旧型後期製品」の一部、「EF58流線形」、それぞれの製品は、 
                真鍮砂鋳物加工製の「鋳鋼先台車」を履いて登場いたしました。  
                 ・
                  本製品の「鋳鋼先台車」は、後年の鋳物量産品「鋳鋼先台車」ではございません。 
                鋳物製量産品が世に出る以前のお品で、
                カツミの職人さんの手による、真鍮板からの「スクラッチビルドで製作された台車」です。 
                この部分にも、たいへんな手間がかかったようです。  
           (6)砂箱は、アンチ製ではなく、真鍮フライス加工製のパーツが付いています。
       以上、通常の製品とはまったく異なる、ハイグレードな仕上げが施された、特別な完成品となっていました。 
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
      ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
     製品・パーツはお写真に写っているお品ですべてです。 
     大部分の主要パーツはあるようですが、 
     一部に不足するパーツもございます。 
         (元々、付けられていないパーツがございます。) 
          ・・・不足、欠損パーツは落札者さまの方で調達・工夫をしてください。 
          ・・・車齢約75年、昔のお品です。アンティーク品です。 
             人為的な大きないたみは見られないようですが、
             長い長い経年の自然劣化は当然ございます。 
             レール上に載せてすぐに走る模型ではございません。 
             オーバーホール・工作が必要な素材とお考えください。 
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 ボデー・下回り(台車)など、ほとんどのパーツは真鍮製です。
 ・・・ボデー部は前面・側板部、各、真鍮プレス加工のパーツをハンダ付で組み立てています。 
      ・・・現状では、経年を考慮すれば、程度のまあまあのボデーではと思われます。 
      ・・・昭和20年代初め頃のたいへん貴重な塗装は、かなり劣化が見られ、あちこち剥げています。 
         ボデー部に、大きな問題(凹みやひどいキズなど)はないようです。    
           ・
  ・・・台車部は、前部の突起部、および、中央部の台枠部など、各それぞれ、真鍮プレス加工のパーツを、
     ハンダ付・ネジ止めで組み立てています。 
     ・・・・・・・・・・・・・・・・・・・・・・・・
     各動輪・先輪の軸箱パーツは亜鉛ダイカスト製です。・・・すべて劣化して、いたんでいます。 
     ・・・・・
    ボデー部は、たいへん古いお品ですが、人為的ないたみはなく、時代・経年を考慮すれば、これでもまあまあな姿ではと思います。 
      ・・・ボデーには人為的なひどいいたみはないようです。 
         ひどい凹みやキズ、変形などの大きな致命的ないたみはないようです。
         経年相応の自然劣化は当然ございます、一部にハンダの外れもございます。 
      ・・・デッキは、残念ながら、欠損していました。 
         同時代のパーツ:デッキを2個お付けいたします。 
           このデッキも、手すりや梯子などにハンダの外れがたくさんございます。・・・修理が必要です。 
      ・・・パンタは、昭和20年代の貴重なパーツ:電機用のパンタグラフが付けられています。 
         4列のバネを持つ電機用パンタです。  
         パンタは経年相応の姿で、いたみがございます。 
           ・・・パンタにはハンダ付け部の外れ、バネの外れ欠損などがございます。  
      ・・・ボデーの窓には、ガラスが嵌め込まれています。・・・1か所ワレがございます。 
      ・・・ボデー裾部に付けられて「エアータンク」が2個、外れて欠損しています。 
         未使用パーツ「エアタンク」が4個付属しています。  
    ・・・・・・
    ・・・・・・
    下回り、台車部は真鍮板のプレス打ち抜き加工です。 
     ・・・主台枠部は、0.5mm厚の真鍮板をプレス加工で窓を抜き、2枚貼り合わせて1.1mm厚の台枠となっています。
        当時の設備では1mm厚の真鍮板をプレスで打ちぬくことが難しかったものと思われます。 
     ・・・先台車は真板加工:スクラッチビルド製作品です。 
     ・・・3軸のインサイドギヤーは、中央が折れ曲がる、「後期製インサイドギヤー」が2個付けられています。 
          6軸の動輪は、2線式にも対応できるように、片側は絶縁車輪に交換されています。  
        先台車の車輪は3先仕様です。 
     台車部にも、経年相応の自然劣化は当然ございます、一部にハンダの外れがございます。 
        ・・・各台車の先端部、先台車を支える細い台枠部のハンダが外れています。 
           主台枠の中央部、ボルスターを取り付ける座金が1か所、ハンダが外れています。 
           その他にも、外れそうな箇所はあると思います。・・・オーバーホールをしてください。  
    ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
    ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
    本製品には、希少・貴重品、当時の古い「AC7極・ボールベアリング入りの大型モーター”SP15”(おそらく未使用品)」が1個付属しています。
     ・・・ベアリングの入った7極:最高級モーターです。 
      ・
            当時の最高級大型ACモーター”カツミSP-20・SP-15などの(7極・ボールベアリング入り)”は、 
            当時~今日に至るまで、この種の機関車用のモーターとしては最高性能を有する強力モーターで、 
            私自身、今日でもこれ以上のモーターと出会っていません。 
                ・・・マグネットモーター(永久磁石の入った)では惰力がなく使い物になりません。 
                   コアレスモーターでは、無理がきかず、価格も高く、使う気になりません。 
            今日では小型のダイオードがございますので、回路に組み込めば、DCモーターとしても使えます。
               ・
            AC7極”SP15”は希少:貴重品です。 
              AC7極”SP20”は結構みかけるのですが、 
              SP-20モーターは、コアが厚く、大きいので、普通の大型電機(EF58旧型・EF58流線形やEH10)などには使えません。
              無理に搭載すると、ボルスター部などで、車高を上げることが必要になり、不自然な形態になってしまいます。 
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 以上です。 
 たいへん古い製品ですので、経年相応のよごれ・いたみ・劣化などがございます。 
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 
 機関車のパーツは、お写真に写っているお品ですべてです。 
 たいへん古いお品であり、不足小パーツもございます。・・・ジャンク品とお考えください。 
 元箱はありません。  
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 中古品(骨董品)のお取引にご理解のある方のみに、ノークレーム・ノーリターンでのご入札をお願いいたします。
 初心者・年少者にはおすすめできません。
 私は、気持ちの良いお取引を望んでおります。 
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 商品は、ヤマト宅配便(送料着払い)でご発送をさせていただきます。
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 他にも鉄道書籍・模型・アンティーク絵葉書・古書・古写真など多数出品いたしております。 よろしければご参照ください。 
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 このお品は、お客様の依頼で、出品させていただきます。
  (お客様の了解を得て、お安いスタート価格で出品させていただきます。) 
 私が使用いたしましたお品ではございませんので、以上のご説明はおおざっぱな観察によるものです。 
 細かい点で、見落としなどがあるかもしれません。 
 限られたお時間で、たくさんの商品を出品いたしておりますので、ご説明には、私の見落としなどあるかも知れません。 
 中古品のお取引に理解のある方、細かいことにこだわりのない方に、ノークレーム、ノーリターンでお願いいたします。
  ・・・代行出品のお品につき、クレーム・返品などはお受けできません。
  ・・・商品のすべてを把握しているわけではございません。
     説明文の不足や誤りがございました場合は、現物の現状優先とお考えください。
   これらのことを、ご理解いただける方のみ、ご入札をお願いいたします。
 私は、気持ちの良いお取引を望んでおります。
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
  
 マイナス評価がたくさんある方、オークションマナーの低い方、無責任な方の入札はご遠慮ください。 
  ・・・・単なる評価数よりも、評価内容を吟味させていただいております。
      悪い取引相手からくる報復悪評価などは、まったく問題にいたしません。
       ・・・私自身も、”悪質な入札者”より被害を受けております。
      評価数が多くても、勝手なキャンセル歴の多い方(本人のマナーが低い方)、本人が原因によるオークショントラブルの多い方は歓迎しません。
      入札をしないでください。
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 お客様の依頼で出品させていただきましたお品につき、この商品のアフター・ケアーなどはできません。
(私の出品物一覧は、私のヤフーID:mad*******の部分をクリックしていただければ、ご覧になれます。)
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
  
 オークション・マナーを身に着けておられる方のみ、ご入札をお願いいたします。
Please log in before asking questions
Question list
All replies from original sellers (total number of questions: items)
After the seller responds, the original page will display the question
Product Price JPY
Japanese Consumption Tax(10%) JPY

A 10% consumption tax is applied to goods and services in Japan. The price may include the tax or it may be added separately. Please check the price details when ordering.

Note: This is a domestic sales tax applied within Japan.

Japan Local Shipping Fee JPY Japan Local Shipping Fee Reference
Product Weight KG The maximum weight limit is 30 kg
International Shipping Methods
Proxy bidding and purchasing services are becoming increasingly convenient. However, overseas shopping carries certain risks and issues. To reduce these risks and enhance shopping safety, please be sure to read the following information:

1. International Shipping

   Air Freight: If the item status is not confirmed within two days after the arrival notice, any customer complaints cannot be addressed with the seller.

2. After Receiving the Product

Please confirm and inspect the product as soon as possible to ensure that the product specifications, quantity, accessories, and description are correct

If, unfortunately, there are any issues, you can refer to the following examples on how to report related product problems:
1. Example of missing product information
2. Example of product not matching provided information
3. Example of damaged product information

Important Notes: 1. If the seller is unwilling to ship overseas or is unaware that the product will be shipped overseas, the international shipping cost for returns or exchanges will need to be borne by the member. You may refer to the EMS e-Express fee inquiry from the post office. If it involves alcoholic beverages or items that affect flight safety, the post office cannot be used for shipment, and only DHL can be used to ship back to Japan.
2. During the product complaint handling period, please retain the complete outer packaging of the product (including the shipping label information), and refrain from attempting any repairs or altering the original condition. Any modifications may result in the inability to process the case.

3. After Inspecting the Product

After receiving and inspecting the item, if you have any questions, it is recommended to contact Letao within 2 hours. Here are some reminders:

1. Please do not unpack, use or repair the received item yourself, and be sure to keep the original packaging to facilitate subsequent handling of related matters, so as to avoid changes to the item that may cause the seller to be unwilling to process.

2. You can call customer service, and the customer service will leave a message for you as below. Please provide the following information:
"Hello, we will first help you establish a complaint case for Product ID: _______ .But we need you to 2-3 clear photos of the product issue, including photos of the product problem, product packaging, shipping details slip, and outer box. Send them to service@letao.my and inform us of your desired resolution (failing to provide this may result in an inability to process subsequent matters). After sending the email, notify us in the customer service message. We will confirm with the seller as soon as possible. and if there are any related questions, we will contact you through the customer service message. Thank you for your cooperation."

Please provide:
1. "Product ID"
2. Photo of the "Delivery Note" (if any)
3. Photos of the outer box (including inner and outer packaging)
4. Photos of the product (Please include relevant descriptions to help us confirm with the seller)

Important Notes:
1. Do not include foreign text or other products in the background of the image.
2. Please keep the complete product packaging (including the shipping label information), and refrain from repairing or altering the original condition on your own, as any changes may result in the case being unable to be processed.
3. Please provide the relevant information within 48 hours to avoid missing the golden hour for reflection and causing situations that cannot be handled.
4. Due to 99% of Japanese sellers being unwilling or unaware of shipping goods overseas, if a seller is willing to handle the issue, the goods must be sent back to Japan, and the international shipping costs incurred must be borne by the member. Letao will use postal EMS international express to send the goods back to Japan.
5. As the goods are purchased from overseas, it may take approximately one to two weeks to complete the relevant processing procedures when issues arise with the goods. Please be reminded that you can inquire about the approximate cost through the EMS service at the post office.

4. FAQ

1. Issue of Authenticity: If antique or branded goods are found to be counterfeit upon receipt, clear photos showing the differences between the genuine product and the imitation must be provided as evidence. If unable to provide relevant proof, assistance can be sought to find a third-party reputable organization for a premium authentication service .
2. Leaking Iron Teapot: If an antique iron teapot is leaking, please take clear photos of the leaking area and provide them.
3. Transport Damage: If the goods are damaged during international shipping (to the pickup point), you need to provide photos of the outer packaging of the parcel and clear photos of the damaged goods' outer packaging.

※ Note: Photos provided to sellers should not contain any foreign-related information.
You may also like
    Seller products
    Excite Translate
    Add to watchlist and notes
    Product name: (くー9) ”EF58 21”カツミ 真鍮製:昭和20年代のメーカー特別仕様完成品ですが、現状はジャンク:組み立て要す。 Oゲージ(1/45・32mm)
    Notes:
    Customer service hours:
    • Monday to Friday 10:00-18:00
    Customer service hotline:
    Customer Service Email: service@letao.my