loading.gif
Notes
Login Sign Up Shopping Cart 简体中文
Add to my favorite categories
category CPU Switch
Path Yahoo Bid > Computer & Accessories > Peripherals > Networking > Switches & Splitters > CPU Switch
Remarks
Add my favorite keywords
Keywords
category CPU Switch
Remarks
Join my favorite seller
Seller 3gJzk***
Remarks
Add to my blacklist seller
Seller 3gJzk***
Remarks
Yahoo Bid Computer & Accessories Peripherals Networking Switches & Splitters CPU Switch
☆48Port, Dominion SX, Serial Console Server/Raritan DSXA-48!(#J3-636)「120サイズ」☆
     

  • Product Quantity
    : 1
  • Starting Bid
    :14,800円
  • Highest Bidder
    : / Rating:
  • Listing Date
    :2025年10月23日 16時28分
  • Bidding closes on
    :2025年10月26日 21時24分
  • Auction Number
    :g1205063031
  • Condition
    :Damaged and stained (specify in description)
  • Automatic Extension
    :No
  • Authentication
    :No
  • Early Closing
    :Yes
  • Can I return the product?
    :no
  • Description
  • Q&A ()
  • Cost Estimator
  • Problem Item Response Procedur

商品の説明
●商品名:Raritan Dominion SX DSXA-48です(#J3-636)。
●写真の通りの商品です。
●Factory Defaults設定。Username: admin/Password: pass (Default: raritanより変更)。
●多少の擦り傷あり。
●機器情報は次の通りです。
 /===================================================/
        PMON Version 2.0.1
        [Length=0x3a968 CRC=0xe6177528]
        Copyright 2006
/===================================================/

128MB Detected

Ethernet Failover Mode Enabled
Serial Number = WAI240****
MAC Address 1= 00:0D:5D:06:**:**
MAC Address 2= 00:0D:5D:06:**:**
Kernel Image Length = 0x681000, CRC = 0xa3034720
-
CRC Check passed
Image Started At Address 0xbf000000.
Image Length = 6819840 (0x681000).
/
CRC Check passed
Image Started At Address 0x80020000.
Image Length = 6819840 (0x681000).
boot: root=/dev/mtdblock1 console=ttySC1,9600
CPU revision is: 00002242
Primary instruction cache 8kb, linesize 16 bytes
Primary data cache 4kb, linesize 16 bytes
Linux version 2.4.12 (builder@builder-sx.raritan.com) 
(gcc version 2.95.3 19991030 (prerelease)) 
#463 Wed Nov 2 17:14:01 EDT 2011
TX3927 -- CRIR:39270040 CCFG:0006203b PCFG:0ffc700d
TX3927 PCIC -- DID:000a VID:102f RID:07 Arbiter:Internal
TJSYS JMR-TX3927 (Rev 2) --- IOC(Rev 3) DIPSW:0,0,0,0
TX39XX D-Cache WriteThrough.
Determined physical RAM map:
memory: 07ffffe8 @ 00000000 (usable)
setup.c -> init ramdisk
InitRD start - -2144972800 end --2140533151Initial 
ramdisk at: 0x80265000 (4439649 bytes)
On node 0 totalpages: 32767
zone(0): 4096 pages.
zone(1): 28671 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 console=ttySC1,9600
Calibrating delay loop... 132.30 BogoMIPS
Memory: 122128k/131068k available (1933k kernel code, 
8940k reserved, 4495k data, 224k init)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Checking for 'wait' instruction...  available.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
pci.c mips_io_port_base is 0xB5000000
PCI: IO 0x00000000-0x00ffffff MEM 0x08000000-0x0fffffff
Scanning bus 00
Found 00:68 [10ec/8139] 000200 00
Found 00:70 [10ec/8139] 000200 00
Found 00:88 [13a8/0158] 000700 00
Found 00:90 [13a8/0158] 000700 00
Found 00:a0 [12d8/8152] 000604 01
Fixups for bus 00
Scanning behind PCI bridge 00:14.0, config 000000, pass 0
Scanning behind PCI bridge 00:14.0, config 000000, pass 1
Scanning bus 01
Found 01:60 [13a8/0158] 000700 00
Found 01:68 [13a8/0158] 000700 00
Found 01:70 [13a8/0158] 000700 00
Found 01:78 [13a8/0158] 000700 00
Fixups for bus 01
Bus scan for 01 returning with max=01
Bus scan for 00 returning with max=01
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Exar's Serial Driver for the PCI Family of UARTs version 3.30 (2004-09-29) 
with SHARE_IRQ SERIAL_PCI enabled
Serial driver version 5.05c (2001-07-08) 
with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
TXx927 Serial driver version 0.20
ttySC00 at 0xfffef300 (irq = 22) is a TXx927 SIO
ttySC01 at 0xfffef400 (irq = 23) is a TXx927 SIO
request_module[parport_lowlevel]: Root fs not mounted
lp: driver loaded but no devices found
MIPS Generic Real Time Clock Driver v0.1
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
PPP generic driver version 2.4.1
toshiba_tx: ioremap is bf000000
toshiba_tx: ioremap is be000000
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 オs
Maximum byte/word write timeout: 1024 オs
Typical full buffer write timeout: 128 オs
Maximum full buffer write timeout: 4096 オs
Typical block erase timeout: 1024 オs
Maximum block erase timeout: 16384 オs
Chip erase not supported
Device size: 0x800000 bytes (8 MiB)
Flash Device Interface description: 0x0001
  - x16-only asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
  Erase Region #0: BlockSize 0x10000 bytes, 128 blocks
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of JEDEC chips: 1
phymap 0 cfi_probe: mymtd is 87fbf510
toshiba_tx flash device(Flash-1): 1000000 at 1f000000
Creating 0 MTD partitions on "Flash-1":
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 オs
Maximum byte/word write timeout: 1024 オs
Typical full buffer write timeout: 128 オs
Maximum full buffer write timeout: 4096 オs
Typical block erase timeout: 1024 オs
Maximum block erase timeout: 16384 オs
Chip erase not supported
Device size: 0x800000 bytes (8 MiB)
Flash Device Interface description: 0x0001
  - x16-only asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
  Erase Region #0: BlockSize 0x10000 bytes, 128 blocks
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of JEDEC chips: 1
phymap 1 cfi_probe: mymtd is 87fbf610
toshiba_tx flash device(Flash-2): 1000000 at 1e000000
Creating 0 MTD partitions on "Flash-2":
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
ip_conntrack (1023 buckets, 8184 max)
ip_tables: (c)2000 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
rd_load_image()
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4335k freed
VFS: Mounted root (ext2 filesystem).
Algorithmics/MIPS FPU Emulator v1.5
Register /dev/phyctrl succeeded
8139too Fast Ethernet driver 0.9.19
setMacAddr 1 set etheraddr
EthernetAddr: [     00:0d:5d:06:**:**]
eth0: RealTek RTL8139 Fast Ethernet at 0xa8002000, 00:0d:5d:06:**:**, IRQ 19
setMacAddr 1 set etheraddr
EthernetAddr: [     00:0d:5d:06:**:**]
eth1: RealTek RTL8139 Fast Ethernet at 0xa8002400, 00:0d:5d:06:**:**, IRQ 19
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.

Please wait for the SX server to start....
Username: admin
Password:
Authentication successful.
System is in reset state.
Please enter new administrator password.
New Password:
Verify New Password:

Setting password...
User admin : Password Saved
--------------------------------------------------------------------------------
Welcome to the DominionSX.  [Model: SX48]
UnitName:DominionSX         FirmwareVersion:3.3.0.5.2      Serial:WAI240****
IP Address:192.168.0.192    UserIdletimeout:10min
--------------------------------------------------------------------------------

Port Port                Port Port                Port Port
No.  Name                No.  Name                No.  Name
1  - Port1 [U]           2  - Port2 [U]           3  - Port3 [U]
4  - Port4 [U]           5  - Port5 [U]           6  - Port6 [U]
7  - Port7 [U]           8  - Port8 [U]           9  - Port9 [U]
10 - Port10 [U]          11 - Port11 [U]          12 - Port12 [U]
13 - Port13 [U]          14 - Port14 [U]          15 - Port15 [U]
16 - Port16 [U]          17 - Port17 [U]          18 - Port18 [U]
19 - Port19 [U]          20 - Port20 [U]          21 - Port21 [U]
22 - Port22 [U]          23 - Port23 [U]          24 - Port24 [U]
25 - Port25 [U]          26 - Port26 [U]          27 - Port27 [U]
28 - Port28 [U]          29 - Port29 [U]          30 - Port30 [U]
31 - Port31 [U]          32 - Port32 [U]          33 - Port33 [U]
34 - Port34 [U]          35 - Port35 [U]          36 - Port36 [U]
37 - Port37 [U]          38 - Port38 [U]          39 - Port39 [U]
40 - Port40 [U]          41 - Port41 [U]          42 - Port42 [U]
43 - Port43 [U]          44 - Port44 [U]          45 - Port45 [U]
46 - Port46 [U]          47 - Port47 [U]          48 - Port48 [U]

Current Time: Mon Oct 20 22:52:56 2025

admin > show all

Dominion SX48 [128Mb]   Serial: WAI240****
Current time: 2025-10-20 22:54:23
Power Supply 1: Good
Power Supply 2: Good
Supporting software:
        OpenSSH_4.3p2, OpenSSL 0.9.7m 23 Feb 2007
        HTTP Server version: Apache/2.2.21 (Unix)
        HTTP Server built:   Jan  1 2000 02:15:26
        TELNET Linux NetKit 0.17
-----------------------------------------------------------
Date /Time Settings:
        Date : 2025-10-20 22:54:26
        Timezone : 13
Version Information :
Firmware Version : 3.3.0.5.2
Kernel Version : 2.4.13
PMON Version: 2.0.1
RSC Version: 3.0.0.5.57
No upgrades have been performed on this device.
Network Settings
        Name: DominionSX
        Domain:
        CSC Port: 5000
        Discover Port: 5000
        Failover: true
        Ethernet Interface: lan1
                MAC: 00:0d:5d:06:**:**
                DHCP Client: true
                IP: 192.168.0.192
                Net Mask: 255.255.255.0
                Gateway: 192.168.0.192
        Ethernet Interface: lan2
                MAC: 00:0d:5d:06:**:**
                Enable: false
                DHCP Client: true
                IP: 192.168.0.192
                Net Mask: 255.255.255.0
                Gateway: 192.168.0.192
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
0.0.0.0         192.168.0.192   0.0.0.0         UG    0      0        0 eth1
Firewall Enabled: false
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     0    --  127.0.0.1            0.0.0.0/0

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
IPForwarding Enabled: true
Modem Settings
        Dialin Enabled: false
        Access Mode: All
        Server Address: 10.0.0.1
        Client Address: 10.0.0.2
        Dialback: false
DPA Mode: Normal
Port Access Mode: share
        Permitted users may access an already occupied port.
Unauthorized Port Access Settings :
        Enable : 0
Port number 1:
        Name: Port1
        BPS: 9600
        Parity: 0
        Flow control: 0
        RSC Terminal Emulation: VT100
        RSC Encoding: DEFAULT
        Disconnect: Disabled
        Char Delay : 0 ms
        Line Delay : 0 ms
        Application: RaritanConsole
        Exit String:
        Escape: Control-]
        Sendbreak Duration : 300 ms
        DPA:
                IP: 0.0.0.0
                Telnet Port: 0
                SSH Port: 0
        Always Active: False
        Multiple Writers: Disabled
        Messages suppressed: none

【中略】

Port number 48:
        Name: Port48
        BPS: 9600
        Parity: 0
        Flow control: 0
        RSC Terminal Emulation: VT100
        RSC Encoding: DEFAULT
        Disconnect: Disabled
        Char Delay : 0 ms
        Line Delay : 0 ms
        Application: RaritanConsole
        Exit String:
        Escape: Control-]
        Sendbreak Duration : 300 ms
        DPA:
                IP: 0.0.0.0
                Telnet Port: 0
                SSH Port: 0
        Always Active: False
        Multiple Writers: Disabled
        Messages suppressed: none
Idle Timeout Settings :
        Enable : true
        Timeout : 10 min

User Settings:
        Login : admin
        Name : Administrator
        Info : Default admin user.
        Dialback :
        Group :Admin
        Active : 1
--------
Group Settings
        Name: Admin
        Class: Admin

【中略】

Kerberos Enabled: false
Security Profile Settings:
        Enable: 0
StrongPassword Settings:
        StrongPasswordRulesEnable : false
        PWUppercaseRequired : true
         PWLowercaseRequired : true
         PWNumberRequired : true
         PWSymbolRequired : true
         PasswordValidityPeriod : 60 Days
         PasswordHistoryDepth : 5
      MinPasswordLength : 8
         MaxPasswordLength : 15
LocalAuthentication Settings:
         Account gets expired if inactive for  : 330 days
LocalAuthentication Settings:
         Number of Retries allowed before a lockout/AccountDeactivation : 3
LocalAuthentication Settings:
         Account gets locked out for : 5 minutes
LocalAuthentication Settings:
        LocalAuthentication Enable status : true
Single Login per User Settings
        Enabled : false
Power Delay Settings :
        Sequence Delay: 2
        Cycle Delay: 5
No power strips configured.
No Power Groups configured.
admin >
●使用されていた商品ですが、全機能を検証する環境が無い為、それ以上の動作は未確認です。
●「電源が入らない」以外は、現状・ノークレーム扱いでの出品とさせて頂きます。
●電源ケーブルが付属します。KVM Moduleは付属しません。その他の付属品は一切ありません。
●写真をご参照の上、ご入札のほど、宜しくお願いします。
●送料は下記の「120サイズ」となります。
●運輸業者は当方で決めさせていただきます。
●上記の発送サイズは1台の場合です。複数同時発送の場合の送料はこちらからご連絡いたします。
●中古のダンボールを使用する事より実際の発送サイズが異なる場合がございます。ご了承下さいませ。
●東京都江戸川区西一之江の倉庫にてのお渡しも可能です。
●その場合は、無梱包お渡しとなります。
●営業時間は月曜日~金曜日、AM10:00~PM18:00となります。
●第1.3.5土曜日のみ、11:00~15:00に限り、営業致します。
●第2.4土曜日・日曜日・祝日は休みになります。
●こちらからのご連絡は平日昼間のみとなります。
●また、お取引後の評価ですが不要のお客様が多い為にこちらからは入れておりま せん。
●評価が必要なお客様は取引メッセージにてのご連絡をお願い致します。
●特定商取法の表示


【送料料金表】
北海道北東北南東北関東信越北陸中部関西中国四国九州沖縄
地域詳細北海道青森
岩手
秋田
宮城
山形
福島
茨城
栃木
群馬
埼玉
千葉
東京
神奈川
山梨
新潟
長野
富山
石川
福井
静岡
愛知
三重
岐阜
滋賀
京都
大阪
兵庫
奈良
和歌山
鳥取
島根
岡山
広島
山口
徳島
香川
愛媛
高知
福岡
佐賀
長崎
熊本
大分
宮崎
鹿児島
沖縄
離島
60サイズ・2kgまで1,460円1,060円940円940円940円940円940円1,060円1,190円1,190円1,460円1,460円
80サイズ・5kgまで1,740円1,350円1,230円1,230円1,230円1,230円1,230円1,350円1,480円1,480円1,740円2,070円
100サイズ・10kgまで2,050円1,650円1,530円1,530円1,530円1,530円1,530円1,650円1,790円1,790円2,050円3,250円
120サイズ・15kgまで2,610円2,170円2,040円2,040円2,040円2,040円2,040円2,170円2,310円2,310円2,610円3,360円
140サイズ・20kgまで3,250円2,780円2,630円2,630円2,630円2,630円2,630円2,780円2,930円2,930円3,250円4,030円
160サイズ・25kgまで3,630円3,160円3,020円3,020円3,020円3,020円3,020円3,160円3,320円3,320円3,630円4,680円
令和7年10月1日よりのヤマト運輸送料です。
Please log in before asking questions
Question list
All replies from original sellers (total number of questions: items)
After the seller responds, the original page will display the question
Product Price JPY
Japanese Consumption Tax(10%) JPY

A 10% consumption tax is applied to goods and services in Japan. The price may include the tax or it may be added separately. Please check the price details when ordering.

Note: This is a domestic sales tax applied within Japan.

Japan Local Shipping Fee JPY Japan Local Shipping Fee Reference
Product Weight KG The maximum weight limit is 30 kg
International Shipping Methods Get Your Limited-Time International Shipping Discount Now!
Proxy bidding and purchasing services are becoming increasingly convenient. However, overseas shopping carries certain risks and issues. To reduce these risks and enhance shopping safety, please be sure to read the following information:

1. International Shipping

   Air Freight: If the item status is not confirmed within two days after the arrival notice, any customer complaints cannot be addressed with the seller.

2. After Receiving the Product

Please confirm and inspect the product as soon as possible to ensure that the product specifications, quantity, accessories, and description are correct

If, unfortunately, there are any issues, you can refer to the following examples on how to report related product problems:
1. Example of missing product information
2. Example of product not matching provided information
3. Example of damaged product information

Important Notes: 1. If the seller is unwilling to ship overseas or is unaware that the product will be shipped overseas, the international shipping cost for returns or exchanges will need to be borne by the member. You may refer to the EMS e-Express fee inquiry from the post office. If it involves alcoholic beverages or items that affect flight safety, the post office cannot be used for shipment, and only DHL can be used to ship back to Japan.
2. During the product complaint handling period, please retain the complete outer packaging of the product (including the shipping label information), and refrain from attempting any repairs or altering the original condition. Any modifications may result in the inability to process the case.

3. After Inspecting the Product

After receiving and inspecting the item, if you have any questions, it is recommended to contact Letao within 2 hours. Here are some reminders:

1. Please do not unpack, use or repair the received item yourself, and be sure to keep the original packaging to facilitate subsequent handling of related matters, so as to avoid changes to the item that may cause the seller to be unwilling to process.

2. You can call customer service, and the customer service will leave a message for you as below. Please provide the following information:
"Hello, we will first help you establish a complaint case for Product ID: _______ .But we need you to 2-3 clear photos of the product issue, including photos of the product problem, product packaging, shipping details slip, and outer box. Send them to service@letao.my and inform us of your desired resolution (failing to provide this may result in an inability to process subsequent matters). After sending the email, notify us in the customer service message. We will confirm with the seller as soon as possible. and if there are any related questions, we will contact you through the customer service message. Thank you for your cooperation."

Please provide:
1. "Product ID"
2. Photo of the "Delivery Note" (if any)
3. Photos of the outer box (including inner and outer packaging)
4. Photos of the product (Please include relevant descriptions to help us confirm with the seller)

Important Notes:
1. Do not include foreign text or other products in the background of the image.
2. Please keep the complete product packaging (including the shipping label information), and refrain from repairing or altering the original condition on your own, as any changes may result in the case being unable to be processed.
3. Please provide the relevant information within 48 hours to avoid missing the golden hour for reflection and causing situations that cannot be handled.
4. Due to 99% of Japanese sellers being unwilling or unaware of shipping goods overseas, if a seller is willing to handle the issue, the goods must be sent back to Japan, and the international shipping costs incurred must be borne by the member. Letao will use postal EMS international express to send the goods back to Japan.
5. As the goods are purchased from overseas, it may take approximately one to two weeks to complete the relevant processing procedures when issues arise with the goods. Please be reminded that you can inquire about the approximate cost through the EMS service at the post office.

4. FAQ

1. Issue of Authenticity: If antique or branded goods are found to be counterfeit upon receipt, clear photos showing the differences between the genuine product and the imitation must be provided as evidence. If unable to provide relevant proof, assistance can be sought to find a third-party reputable organization for a premium authentication service .
2. Leaking Iron Teapot: If an antique iron teapot is leaking, please take clear photos of the leaking area and provide them.
3. Transport Damage: If the goods are damaged during international shipping (to the pickup point), you need to provide photos of the outer packaging of the parcel and clear photos of the damaged goods' outer packaging.

※ Note: Photos provided to sellers should not contain any foreign-related information.
You may also like
    Seller products
    Excite Translate
    Add to watchlist and notes
    Product name: ☆48Port, Dominion SX, Serial Console Server/Raritan DSXA-48!(#J3-636)「120サイズ」☆
    Notes:
    Customer service hours:
    • Monday to Friday 10:00-18:00
    Customer service hotline:
    Customer Service Email: service@letao.my