loading.gif
Notes
Login Sign Up Shopping Cart 简体中文
Add to my favorite categories
category Other
Path Yahoo Bid > Hobbies & Crafts > Wireless Devices > Other
Remarks
Add my favorite keywords
Keywords
category Other
Remarks
Join my favorite seller
Seller AWtiM***
Remarks
Add to my blacklist seller
Seller AWtiM***
Remarks
Yahoo Bid Hobbies & Crafts Wireless Devices Other
【HPマイクロ波】希少 MICRO LAMBDA社 MYYT-10218 Broadband Switched YIG発振器 2GHz-18GHz +14dBm +15V/±5V 動作簡易確認済 ジャンク品
        

  • Product Quantity
    : 1
  • Starting Bid
    :68,000円
  • Highest Bidder
    : / Rating:
  • Listing Date
    :2026年01月18日 20時16分
  • Bidding closes on
    :2026年01月25日 18時15分
  • Auction Number
    :r1128975312
  • Condition
    :Damaged and stained (specify in description)
  • Automatic Extension
    :No
  • Authentication
    :Yes(Description)
  • Early Closing
    :Yes
  • Can I return the product?
    :no
  • Description
  • Q&A ()
  • Cost Estimator
  • Problem Item Response Procedur
Notes
  1. Radio communications related products (import and export documents required) cannot be assisted in importing.
  2. Faulty product, please pay attention before subscribing

商品説明※【HPマイクロ波】は検索用キーワードです。

ご覧頂きましてありがとうございます。

当方所蔵整理品です。

米国MICRO LAMBDA社の MYYT-10218/MLOS-1104T
 Broadband Switched YIG発振器(YTO/YIG TUNED OSCILLATOR)
  2GHz-18GHz +14dBm +15V/±5V
になります。

米国Giga-tronics社マイクロ波シンセ(10MHz-18GHz)からの取り外し品です。

希少な極レア品だと思います。

2つの帯域(2GHz-8GHz)と(8GHz-18GHz)のYIG circuitsをsingle magnetic structure
に組み込んだ、2GHz~18GHzの広帯域なSwitched YIG発振器です。

2つの帯域の切り換えポイントは8GHzで、200MHzのオーバーラップ仕様になっています。
切り換えは自動ではなく、外部からTTL端子で制御します。

  TTL端子 L:8GHz~18GHz  H:2GHz~8GHz

下記の動作チェックでわかりましたが、どうもこのTTL端子がGiga-tronics社仕様に
なっているようで、DC電源で0V印加しても、TTL:Lにならないようです。
内部回路がどうなっているのかわかりませんが、TTL:Lにするためには、
TTL端子を直接GNDに落とす必要があります。

TTL端子の外部からの制御は、
  直接GNDに落とす ⇒ TTL:L
  オープン開放にする ⇒ TTL:H
でうまくいきました。下記動作チェックはこれで行ないました。

Giga-tronics社向けのカスタム仕様ですので、型番がイレギュラーになっていますが、
MICRO LAMBDA社の現行カタログ標準品の、

 MLXS-T SERIES EXTREME LOW PHASE NOISE YIG TUNED OSCILLATORS MLXS-0218T

に相当します。

★米国MICRO LAMBDA社について★
 マイクロラムダ社(Micro Lambda Wireless Inc)は、YIG製品を外販する
 メーカーとしては世界最大です。1990年に設立され、
 アメリカ合衆国、カリフォルニア州、フリーモントにオフィスがあります。
 YIGテクノロジーは、AVANTEK技術を継承し、低移相ノイズとマルチオクターブ
 ソリューションで発振器は44GHzまで、フィルタは50GHzまでをカバーし、
 その他 PLO、シンセサイザ、ハーモニックジェネレータ及びYIGドライバがあります。
 またカスタム設計製品も幅広く供給しています。
 ※WEBからの引用です。

MICRO LAMBDA社のWEBから、

  MLXS-T SERIES EXTREME LOW PHASE NOISE YIG TUNED OSCILLATORS

のData Sheet PDFを入手出来ます。(画像参照)

また、APPLICATION NOTE YIG DRIVERS PDF も入手出来ますので、
TUNEコイル駆動回路を自作される方は、V-I変換ドライバー回路が載っていますので、
ご参考になると思います。

現行カタログ標準品のMLXS-0218Tの主なカタログスペックは、

   Frequency Range,Min:2-18GHz
   Power Output,Min:+14dBm
   Power Output Variation,Max:±3.0dB
   Operating Case Temperature Range:0℃ to +65℃
   2nd Harmonic,Min:-12dBc
   3rd Harmonic,Min:-15dBc
   Band Switching Accuracy,Max:8MHz
   Band Switching, TTL=0/TTL=1:8-18/2-8GHz
   Main Coil Input Impedance at 1kHz:6Ω 75mH
   FM Coil Input Impedance at 1kHz:1.0Ω 2μH
   DC Circuit Power,Max:+15VDC±5% 250mA
              -5VDC±5% 60mA
              +5VDC±5% 35mA
   YIG Heater Power:24VDC±4V 300mA/50mA

となっています。詳細はData Sheet PDFを入手されてご確認下さい。

制御端子ピンには印字がありますので、ピン配は明確です。

  +15V、+5V、-5V、+FM、-FM、+TUNE、-TUNE、HTR、HTR、TTL

GNDは筐体です。

大きさは、2.00インチシリンダー(直径約50.8mm)で、高さは約35.6mmです。

★ご使用上の注意点★

 ①Main Coilの抵抗値が小さく(6Ω)、インダクタンス値が大きい(75mH)です。
  定電流電源の発振にご留意下さい。定電流電源は誘導性負荷に弱いです。
  当方では、定電流電源出力(+)(-)間に、3300μFの電解コンデンサを付けて、
  共振周波数を下げて、発振を防止しています。

 ②TUNEコイルに最大1000mA流しますので、発熱します。
  アルミ板ヒートシンクが付いていますが、ご使用の際に温度上昇にご留意下さい。
  動作温度スペックは上限+65℃までです。
  当方では下記の動作チェックの際には、ブロワーで空冷しながら測定しました。
  (画像参照)

 ③電源電圧スペックは、
    +15V±5% ⇒ +14.25V~15.75V
    -5V±5% ⇒ -4.75V~-5.25V
    +5V±5% や +4.75V~+5.25V
  となっています。ご留意下さい。

 ④TTL端子は、GNDに落とす(L)、オープンにする(H)で動作しました。

 ⑤マイクロ波デバイスは、とてもデリケートです。
  取り扱いには、充分ご配慮下さい。(衝撃、振動、静電気等)

状態を確認する為に、下記のアマチュア的動作チェックをしました。
※TUNEコイル電流をパラメータとした、発振周波数と発振出力レベルの、
 大まかな確認になります。
※FMコイルは、未接続オープンです。

①テスター(HP E2377A)で各コイル直流抵抗値を測定。(室温冷却状態)
  TUNEコイル:5.6Ω
  FMコイル:1.3Ω
  HEATERコイル:66.0Ω
  ※テスターリード抵抗値0.1Ωを含む

②4台の安定化DC電源(Keysight E3642A/Agilent E3640A 2台/SE 342)
 より、それぞれ、TUNEコイル、+20V/HEATERコイル、+15V、±5Vを供給。
   Keysight E3642A CC定電流モード ⇒ TUNEコイル
   Agilent E3640A CV定電圧モード ⇒ +15V
   Agilent E3640A CV定電圧モード ⇒ +20V/HEATERコイル
   SE(昭和エレクトロニクス) 342(4出力) ⇒ ±5V

 実測電流値は、
   +20V/HEATERコイル:約68mA(安定化後です)
   +15V:約113mA  +5V:25mA  -5V:約33mA
 でした。

③発振出力SMA端子に、アイソレーションとスペアナ保護を兼ねて10dBATTを挿入。
 ※Agilent 8493C 10dB(3.5mm/DC-26.5GHz)
 ※12GHzの2次高調波24GHzを測定するので、あえて3.5mmATTを使用。

④10dBATTとスペアナ(ADVANTEST R3273)を短いセミフレキシブルケーブルで接続。
 発振周波数と発振出力レベルを測定。
 ※スペアナ設定は、Refレベル:+10dBm Span:500MHz
  MARKER SIG TRK機能を使い、常に画面中央にて自動Peak Serch

⑤TUNEコイルに電流を流し、発振周波数と発振出力レベルを測定。

         TTL端子:オープン(H)  TTL端子:GNDショート(L)
   TUNE電流  発振周波数 発振出力  発振周波数 発振出力
    97mA   1.93GHz  +8.2dBm
    98mA   1.95GHz  +12.8dBm
    99mA   1.97GHz  +14.2dBm
    100mA   1.99GHz  +14.7dBm
    101mA   2.00GHz  +15.0dBm
    110mA   2.17GHz  +16.4dBm
    120mA   2.36GHz  +17.0dBm
    140mA   2.74GHz  +16.8dBm
    150mA   2.93GHz  +16.8dBm
    160mA   3.12GHz  +16.7dBm
    180mA   3.51GHz  +16.6dBm
    200mA   3.89GHz  +15.4dBm
    220mA   4.27GHz  +15.2dBm  この間発振せず(回路STOP)
    240mA   4.66GHz  +15.0dBm
    250mA   4.85GHz  +15.4dBm
    260mA   5.04GHz  +15.4dBm
    280mA   5.42GHz  +15.6dBm
    300mA   5.80GHz  +15.5dBm
    320mA   6.19GHz  +16.4dBm
    340mA   6.57GHz  +15.9dBm
    350mA   6.76GHz  +15.6dBm
    360mA   6.95GHz  +16.3dBm
    380mA   7.34GHz  +16.8dBm
    400mA   7.72GHz  +16.0dBm
    405mA   測定パス        7.83GHz  +13.3dBm(発振開始)
    410mA   測定パス        7.92GHz  +14.7dBm
    415mA   8.00GHz  +15.2dBm  測定パス
    420mA   8.10GHz  +15.1dBm   8.11GHz  +14.3dBm
    425mA   8.20GHz  +14.9dBm  測定パス 
    430mA   8.29GHz  +14.8dBm  測定パス         
    440mA   8.48GHz  +14.7dBm  8.48GHz  +14.6dBm
    450mA   8.67GHz  +14.5dBm  8.67GHz  +14.2dBm
    460mA   8.87GHz  +14.6dBm  8.86GHz  +14.2dBm
    480mA   9.25GHz  +13.9dBm  9.24GHz  +14.0dBm
    500mA   9.63GHz  +12.5dBm  9.62GHz  +14.0dBm
    520mA   10.01GHz  +12.8dBm  10.00GHz  +14.9dBm
    540mA   10.39GHz  +13.0dBm  10.38GHz  +15.8dBm
    550mA   10.58dBm  +12.4dBm  10.57GHz  +15.6dBm
    560mA   10.77GHz  +11.2dBm  10.76GHz  +15.7dBm
    580mA   ここで測定終了     11.14GHz  +15.7dBm
    600mA               11.53GHz  +15.8dBm
    620mA               11.91GHz  +15.2dBm
    640mA               12.29GHz  +15.2dBm
    650mA               12.48GHz  +14.9dBm
    660mA               12.68GHz  +14.9dBm
    680mA               13.06GHz  +14.3dBm
    700mA               13.50GHz  +14.2dBm
    720mA               13.82GHz  +14.2dBm
    740mA               14.20GHz  +14.2dBm
    750mA               14.40GHz  +14.1dBm
    760mA               14.59GHz  +13.9dBm
    780mA               14.97GHz  +14.0dBm
    800mA               15.35GHz  +13.0dBm
    820mA               15.73GHz  +14.2dBm
    840mA               16.11GHz  +13.8dBm
    850mA               16.30GHz  +14.0dBm
    860mA               16.50GHz  +12.9dBm
    880mA               16.88GHz  +13.8dBm
    900mA               17.26GHz  +14.2dBm
    920mA               17.64GHz  +14.5dBm
    940mA               18.02GHz  +13.9dBm
    950mA               18.21GHz  +13.7dBm
    960mA               18.40GHz  +13.8dBm
    970mA               18.59GHz  +13.3dBm
    980mA               18.78GHz  +13.1dBm
    990mA               18.97GHz  +11.7dBm
    1000mA               19.16GHz  +11.7dBm
    1010mA               19.35GHz  +11.2dBm
    1020mA               19.54GHz  +9.9dBm
    1030mA               19.72GHz  +8.1dBm
    1033mA               発振停止

  2GHzから18GHzまで、+14dBm(25mW)程度の出力です。
  ※YTO出力に10dBATTを挿入しているので、スペアナ表示に+10dBmします。
  ※R3273のプリセレ同調ズレによるレベル低下を改善する為、
   適宜Presel Auto Tuneを実行して、測定しています。

⑥現行カタログ標準品の2次高調波レベルのスペックが、Min-12dBcと高めなので、
 12GHz、13GHz発振時の2次高調波24GHz、26GHzのレベルを測定してみました。
  (画像参照)

   基本波   12.0025GHz +16.2dBm
   2次高調波  24.0045GHz -7.2dBm ⇒ -23.4dBc

   基本波   13.0115GHz +13.5dBm
   2次高調波  26.0230GHz -9.2dBm ⇒ -22.7dBc

 ※24GHz、26GHzが、-10dBm程度出ています。
  26.5GHzYTFや、WR-42/34/28導波管をHPFとして利用すれば、
  24GHzのみを取り出せます。※厳密には3次、4次も含まれますが。
 ※10GHz~13GHzをスイープ発振させれば、2次高調波20GHz~26GHz
  のスイープ出力も実現出来そうです。
  (YTFとの連動は制御回路の設計ハードルが高そうですので、
   導波管HPFで取り出すのが良さそうですが・・・)

※測定機材は校正していませんので、精度を保証するものではありません。
 あくまでもアマチュアレベル参考値です。
※測定機材は出品対象ではありません。

暫定放熱板として、取り付けアルミ板をそのまま残しています。(画像参照)

取り外し品で、経年変化に伴う傷、汚れ、クスミがあります。
詳細は確認していませんので、現状優先とします。
状態は画像にてご確認下さい。

あくまでも、中古現状渡しジャンク品となります。
ノークレーム&ノーリターンでお願いします。
※画像内のスケール、測定機材は出品対象ではありません。

もともと付いていた、電流検出抵抗5Ω/25Wをそのまま残しています。
(画像参照)

メジャーなMICRO LAMBDA社の広帯域Switched YIG発振器です。
MICRO LAMBDA社は老舗AVANTEK社の技術を継承しています。
8GHzで切り換えが必要ですが、2GHz~18GHz信号源(簡易CWSG)が造れます。
レベリング無しであれば、19GHzまで出せます。
工作のし甲斐がある希少逸品だと思います。
マイクロウェーブ信号源として、工作、製作、試作、測定、実験、研究等に、
ご利用いかがでしょうか。

発送は、ヤマト宅急便(60サイズ)着払いで行ないますので、
落札金額のみをご入金下さい。
※梱包時点での手持ち箱を使用します。
着払い送料は、落札者様ご負担でお願いします。
送料は落札者様にてお調べ願います。発送地は東京都です。
なお、
 お届け日
 時間(午前中/14~16時/16~18時/18~20時/19~21時)
指定が可能ですので、落札後、ご入金前に、取引ナビにてお知らせ下さい。
お取引に際しまして・全てノークレーム&ノーリターンが前提でお願いします。
・送付方法の変更はお受け出来ません。
・落札後、3日(72時間)以内に初回連絡をお願いします。
・受領後、3日(72時間)以内に受領連絡をお願いします。
・商品の発送は、ご入金確認後の週末になる場合がございます。
 商品発送を急がれる方は、ご遠慮下さい。対応出来ません。
・ご質問に、迅速にお答え出来ない場合もございます。
・梱包材、緩衝材は再利用品を使用します。
・領収書の発行は出来ません。
・落札後のアフターサポートは対応出来ません。
以上を、ご納得&ご同意頂ける方のみ、入札をご検討下さい。
送付方法ヤマト宅急便着払い
支払方法Yahoo!かんたん決済(詳細
その他①落札後、領収書を希望される方がいらっしゃいますが、
 領収書は発行出来ませんので、ご了解下さい。
②ヤマト宅急便で、日時指定のご希望は、
 必ずお支払い前にご連絡下さい。
 お支払い後では、発送済みの場合がございます。
③最近、海外へそのまま転送する為、海外輸送に耐える梱包を
 要求される方がいらっしゃいますが、対応出来ません。
 国内輸送を前提とした常識的な梱包を行います。
④同梱は同日落札分のみ対応します。
 翌日以降の追加落札分の同梱要求は、対応出来ません。
 送付先のご連絡を頂きましたら、すぐに梱包を行います。
よろしくお願い致します。

この商品説明は オークション落札相場サイト「オークファン」出品テンプレート で作成されています。
Powered by aucfan.com

Please log in before asking questions
Question list
All replies from original sellers (total number of questions: items)
After the seller responds, the original page will display the question
Product Price JPY
Japanese Consumption Tax(10%) JPY

A 10% consumption tax is applied to goods and services in Japan. The price may include the tax or it may be added separately. Please check the price details when ordering.

Note: This is a domestic sales tax applied within Japan.

Japan Local Shipping Fee JPY Japan Local Shipping Fee Reference
Product Weight KG The maximum weight limit is 30 kg
International Shipping Methods
Proxy bidding and purchasing services are becoming increasingly convenient. However, overseas shopping carries certain risks and issues. To reduce these risks and enhance shopping safety, please be sure to read the following information:

1. International Shipping

   Air Freight: If the item status is not confirmed within two days after the arrival notice, any customer complaints cannot be addressed with the seller.

2. After Receiving the Product

Please confirm and inspect the product as soon as possible to ensure that the product specifications, quantity, accessories, and description are correct

If, unfortunately, there are any issues, you can refer to the following examples on how to report related product problems:
1. Example of missing product information
2. Example of product not matching provided information
3. Example of damaged product information

Important Notes: 1. If the seller is unwilling to ship overseas or is unaware that the product will be shipped overseas, the international shipping cost for returns or exchanges will need to be borne by the member. You may refer to the EMS e-Express fee inquiry from the post office. If it involves alcoholic beverages or items that affect flight safety, the post office cannot be used for shipment, and only DHL can be used to ship back to Japan.
2. During the product complaint handling period, please retain the complete outer packaging of the product (including the shipping label information), and refrain from attempting any repairs or altering the original condition. Any modifications may result in the inability to process the case.

3. After Inspecting the Product

After receiving and inspecting the item, if you have any questions, it is recommended to contact Letao within 2 hours. Here are some reminders:

1. Please do not unpack, use or repair the received item yourself, and be sure to keep the original packaging to facilitate subsequent handling of related matters, so as to avoid changes to the item that may cause the seller to be unwilling to process.

2. You can call customer service, and the customer service will leave a message for you as below. Please provide the following information:
"Hello, we will first help you establish a complaint case for Product ID: _______ .But we need you to 2-3 clear photos of the product issue, including photos of the product problem, product packaging, shipping details slip, and outer box. Send them to service@letao.my and inform us of your desired resolution (failing to provide this may result in an inability to process subsequent matters). After sending the email, notify us in the customer service message. We will confirm with the seller as soon as possible. and if there are any related questions, we will contact you through the customer service message. Thank you for your cooperation."

Please provide:
1. "Product ID"
2. Photo of the "Delivery Note" (if any)
3. Photos of the outer box (including inner and outer packaging)
4. Photos of the product (Please include relevant descriptions to help us confirm with the seller)

Important Notes:
1. Do not include foreign text or other products in the background of the image.
2. Please keep the complete product packaging (including the shipping label information), and refrain from repairing or altering the original condition on your own, as any changes may result in the case being unable to be processed.
3. Please provide the relevant information within 48 hours to avoid missing the golden hour for reflection and causing situations that cannot be handled.
4. Due to 99% of Japanese sellers being unwilling or unaware of shipping goods overseas, if a seller is willing to handle the issue, the goods must be sent back to Japan, and the international shipping costs incurred must be borne by the member. Letao will use postal EMS international express to send the goods back to Japan.
5. As the goods are purchased from overseas, it may take approximately one to two weeks to complete the relevant processing procedures when issues arise with the goods. Please be reminded that you can inquire about the approximate cost through the EMS service at the post office.

4. FAQ

1. Issue of Authenticity: If antique or branded goods are found to be counterfeit upon receipt, clear photos showing the differences between the genuine product and the imitation must be provided as evidence. If unable to provide relevant proof, assistance can be sought to find a third-party reputable organization for a premium authentication service .
2. Leaking Iron Teapot: If an antique iron teapot is leaking, please take clear photos of the leaking area and provide them.
3. Transport Damage: If the goods are damaged during international shipping (to the pickup point), you need to provide photos of the outer packaging of the parcel and clear photos of the damaged goods' outer packaging.

※ Note: Photos provided to sellers should not contain any foreign-related information.
You may also like
    Seller products
    Excite Translate
    Add to watchlist and notes
    Product name: 【HPマイクロ波】希少 MICRO LAMBDA社 MYYT-10218 Broadband Switched YIG発振器 2GHz-18GHz +14dBm +15V/±5V 動作簡易確認済 ジャンク品
    Notes:
    Customer service hours:
    • Monday to Friday 10:00-18:00
    Customer service hotline:
    Customer Service Email: service@letao.my