loading.gif
Notes
Login Sign Up Shopping Cart 简体中文
Add to my favorite categories
category Other
Path Yahoo Bid > Hobbies & Crafts > Wireless Devices > Other
Remarks
Add my favorite keywords
Keywords
category Other
Remarks
Join my favorite seller
Seller AWtiM***
Remarks
Add to my blacklist seller
Seller AWtiM***
Remarks
Yahoo Bid Hobbies & Crafts Wireless Devices Other
【HPマイクロ波】TELEDYNE MICROWAVE社 FS2334 Multi-Octave YIG発振器 実測3.2GHz-19.5GHz +20dBm +15V単電源 動作簡易確認済 ジャンク品
        

  • Product Quantity
    : 1
  • Starting Bid
    :75,000円
  • Highest Bidder
    : / Rating:
  • Listing Date
    :2026年01月23日 18時04分
  • Bidding closes on
    :2026年01月30日 18時04分
  • Auction Number
    :w1138677536
  • Condition
    :Damaged and stained (specify in description)
  • Automatic Extension
    :No
  • Authentication
    :Yes(Description)
  • Early Closing
    :Yes
  • Can I return the product?
    :no
  • Description
  • Q&A ()
  • Cost Estimator
  • Problem Item Response Procedur
Notes
  1. Radio communications related products (import and export documents required) cannot be assisted in importing.
  2. Faulty product, please pay attention before subscribing

商品説明※【HPマイクロ波】は検索用キーワードです。

ご覧頂きましてありがとうございます。

当方所蔵整理品です。

米国TELEDYNE MICROWAVE社の FS2334
  Multi-Octave YIG発振器(YTO/YIG TUNED OSCILLATOR)
    3.2GHz-19.5GHz(実測) +20dBm(実測) +15V単電源
になります。

マイクロ波機器からの取り外し品です。

★米国TELEDYNE MICROWAVE社YIG Productsについて★
  YIG productsの前身は、1981年に米国カリフォルニアで創業したFerretec社
  になります。1983年からTeledyne Familyと協業関係になり、2004年に
  Ferretec社のYIG Productsは、Teledyne Technologiesに買収され、
  Teledyne Microwave社の傘下になっています。  

ググって、TELEDYNE MICROWAVE社の、
  ① YIG Filters and Oscillators The Complete Microwave Solution
  ② Oscillators the complete microwave solution
2つのカタログ PDFを入手出来ます。(画像参照)

TELEDYNE MICROWAVE社のYIG発振器の特長は、
   ・Multi-Octave Tuning
   ・Excellent Linearity
   ・Flat Power Output vs Frequency
と記載されています。またアプリケーションとして、
   ・Sweep Oscillators
   ・Low Noise Synthesizers
   ・Receiver Local Oscillators
   ・Jammer Exciters
と記載されています。

出品物の型名FS2334は載っていませんので、カスタム仕様モデルと推測します。
実測結果の周波数レンジから、類似品はFS1014(4GHz-18GHz)と思われます。

周波数レンジ類似品のFS1014の主なカタログスペックは、

   Frequency Range:4-18GHz
   Power Output,Min:+13dBm
   Power Output Variation,Max:±2.5dB
   Operating Case Temperature Range:0℃ to +60℃
   Harmonic,Max:-12dBc
   Main Coil Input Impedance:6Ω 90μH
   FM Coil Input Impedance:1.0Ω 1.0μH
   DC Circuit Power,Max:+15V 250mA
   YIG Heater Power:28V±4V 500mA(Turn-On)/40mA(Steady State)

となっています。

制御端子ピンはカタログに明記されていますので、ピン配は明確です。

   ラベルNo  機能
    E1   MAIN COIL(+) 
    E2   MAIN COIL(-)
    E3   FM COIL(+)
    E4   FM COIL(-)
    E5   NC
    E6   +15V
    E7   GND
    E8   HEATER(-)
    E9   HEATER(+)

大きさは、2インチシリンダー(直径約50.8mm)で、高さは約42mmです。
アルミヒートシンクの大きさは、約66mm×160mm×12mmです。

特長詳細は、2つのカタログ PDFを入手されて、ご確認下さい。

★ご使用上の注意点★

 ①MAINコイルの抵抗値が小さく、インダクタンス値も小さめなので(μHオーダー)
  定電流電源の発振リスクは大きくはないと思います。
  当方では、YTOテストの際には、定電流電源出力(+)(-)間に、
  3300μFの電解コンデンサを付けて、共振周波数を下げて発振を防止しています。

 ②MAINコイルに最大1000mA流しますので、発熱します。
  アルミヒートシンクが付いていますが、ご使用の際に温度上昇にご留意下さい。
  動作温度スペックは+60℃までです。※85℃ではスペックダウンします。
  当方では動作チェックの際には、ブロワーで強制空冷しながら測定しました。
  (画像参照)

 ③マイクロ波デバイスは、とてもデリケートです。
  取り扱いには、充分ご配慮下さい。(衝撃、振動、静電気等)

状態を確認する為に、下記のアマチュア的動作チェックをしました。
 ※MAINコイル電流をパラメータとした、発振周波数と発振出力レベルの、
  大まかな確認になります。
 ※FMコイルは、未接続オープンです。

 ①テスター(HP E2377A)で各コイル直流抵抗値を測定。(室温冷却状態)
    MAINコイル:6.2Ω
    FMコイル:1.5Ω
    HEATERコイル:127.0Ω
     ※テスターリード抵抗値0.1Ωを含む

 ②3台の安定化DC電源(Keysight E3642A/Agilent E3640A/Advantest TR6143)より、
  それぞれ、MAINコイル、+15V、HEATERコイル/+28V を印加。
    Keysight E3642A CC定電流モード ⇒ MAINコイル
    Agilent E3640A CV定電圧モード ⇒ +15V
    Advantest TR6143 CV定電圧モード ⇒ HEATERコイル/+28V

  実測電流値は、
    HEATERコイル/+28V:約38mA(安定化後です)
    +15V:約143mA~186mA(発振周波数/MAINコイル電流で変動します)
  でした。

 ③発振出力SMA端子に、アイソレーションとスペアナ保護を兼ねて10dBATTを挿入。
    ※Agilent 8493C 10dB(3.5mm/DC-26.5GHz)
    ※12GHzの2次高調波24GHzを測定するので、あえて3.5mmATTを使用。

 ④10dBATTとスペアナ(Advantest R3273)を短いセミフレキシブルケーブルで接続。
  発振周波数と発振出力レベルを測定。
   ※スペアナ設定は、Refレベル:+20dBm Span:500MHz
    MARKER SIG TRK機能を使い、常に画面中央にて自動Peak Serch

 ⑤MAINコイルに電流を流し、発振周波数と発振出力レベルを測定。

   TUNE電流   発振周波数   発振出力レベル
    82mA    1.56GHz    +16.9dBm
    85mA    1.62GHz    +17.7dBm
    90mA    1.70GHz    +18.7dBm
    95mA    1.79GHz    +18.8dBm
    100mA    1.89GHz    +18.9dBm
    110mA    2.07GHz    +17.7dBm
    120mA    2.27GHz    +17.7dBm
    130mA    2.41GHz    +17.8dBm
    140mA    2.58GHz    +17.9dBm
    150mA    2.75GHz    +17.9dBm

    この間(150mA~160mA)に周波数が飛んで不連続になります。

    160mA    3.23GHz    +20.6dBm
    170mA    3.42GHz    +21.0dBm
    180mA    3.61GHz    +19.9dBm
    190mA    3.80GHz    +19.8dBm
    200mA    4.00GHz    +20.0dBm
    210mA    4.19GHz    +20.4dBm
    220mA    4.38GHz    +20.5dBm
    230mA    4.57GHz    +20.5dBm
    240mA    4.76GHz    +20.6dBm
    250mA    4.96GHz    +20.6dBm
    260mA    5.15GHz    +20.7dBm
    270mA    5.34GHz    +20.9dBm
    280mA    5.53GHz    +20.8dBm
    290mA    5.72GHz    +21.0dBm
    300mA    5.91GHz    +20.8dBm
    310mA    6.11GHz    +20.8dBm
    320mA    6.30GHz    +20.5dBm
    330mA    6.49GHz    +20.5dBm
    340mA    6.68GHz    +20.5dBm
    350mA    6.88GHz    +20.6dBm
    360mA    7.07GHz    +20.8dBm
    370mA    7.26GHz    +20.7dBm
    380mA    7.45GHz    +20.8dBm
    390mA    7.65GHz    +20.2dBm
    400mA    7.84GHz    +20.0dBm
    410mA    8.03GHz    +20.5dBm
    420mA    8.22GHz    +20.8dBm
    430mA    8.42GHz    +21.5dBm
    440mA    8.61GHz    +21.3dBm
    450mA    8.80GHz    +21.3dBm
    460mA    8.99GHz    +21.1dBm
    470mA    9.18GHz    +20.7dBm
    480mA    9.37GHz    +21.0dBm
    490mA    9.56GHz    +20.7dBm
    500mA    9.75GHz    +21.0dBm
    510mA    9.94GHz    +21.2dBm
    520mA    10.13GHz    +20.5dBm
    530mA    10.33GHz    +21.2dBm
    540mA    10.52GHz    +20.0dBm
    550mA    10.71GHz    +20.7dBm
    560mA    10.90GHz    +20.6dBm
    570mA    11.09GHz    +21.3dBm
    580mA    11.28GHz    +21.1dBm
    590mA    11.47GHz    +21.9dBm
    600mA    11.66GHz    +21.8dBm
    610mA    11.85GHz    +21.5dBm
    620mA    12.04GHz    +21.1dBm
    630mA    12.23GHz    +21.8dBm
    640mA    12.42GHz    +21.4dBm
    650mA    12.61GHz    +22.1dBm
    660mA    12.81GHz    +21.7dBm
    670mA    13.00GHz    +21.7dBm
    680mA    13.19GHz    +21.9dBm
    690mA    13.38GHz    +22.0dBm
    700mA    13.57GHz    +21.7dBm
    710mA    13.76GHz    +21.9dBm
    720mA    13.95GHz    +21.1dBm
    730mA    14.15GHz    +21.5dBm
    740mA    14.34GHz    +20.8dBm
    750mA    14.53GHz    +21.5dBm
    760mA    14.72GHz    +21.0dBm
    770mA    14.91GHz    +21.9dBm
    780mA    15.10GHz    +21.1dBm
    790mA    15.29GHz    +21.1dBm
    800mA    15.49GHz    +20.9dBm
    810mA    15.68GHz    +21.8dBm
    820mA    15.87GHz    +20.5dBm
    830mA    16.06GHz    +21.0dBm
    840mA    16.25GHz    +21.1dBm
    850mA    16.44GHz    +20.8dBm
    860mA    16.63GHz    +20.9dBm
    870mA    16.83GHz    +20.7dBm
    880mA    17.02GHz    +19.7dBm
    890mA    17.21GHz    +20.2dBm
    900mA    17.40GHz    +19.2dBm
    910mA    17.59GHz    +19.1dBm
    920mA    17.79GHz    +19.1dBm
    930mA    17.98GHz    +19.7dBm
    940mA    18.17GHz    +19.6dBm
    950mA    18.36GHz    +20.0dBm
    960mA    18.55GHz    +20.0dBm
    970mA    18.74GHz    +20.8dBm
    980mA    18.93GHz    +19.9dBm
    990mA    19.12GHz    +20.8dBm
    1000mA    19.31GHz    +20.8dBm
    1010mA    19.50GHz    +20.0dBm
    1011mA    発振停止

  3.2GHzから19.5GHzまで、+20dBm(100mW)前後の出力です。
  ※YTO出力に10dBATTを挿入しているので、スペアナ表示に+10dBmします。
  ※R3273のプリセレ同調ズレによるレベル低下を改善する為、
   適宜Presel Auto Tuneを実行して、測定しています。

 ⑥類似品の2次高調波レベルのスペックが、Min-12dBcと高めなので、
  12GHz、13GHz発振時の2次高調波24GHz、26GHzのレベルを測定してみました。
  (画像参照)

   基本波   12.0440GHz +21.7dBm
   2次高調波  24.0870GHz -14.9dBm ⇒ -36.6dBc

   基本波   12.9985GHz +21.4dBm
   2次高調波  25.9960GHz -1.2dBm ⇒ -22.6dBc

 ※24GHz、26GHzが、-15dBm、-1dBm程度出ています。
  26.5GHzYTFや、WR-42/34/28導波管をHPFとして利用すれば、
  24GHz、26GHzのみを取り出せます。※厳密には3次、4次も含まれますが。

 ※測定ケーブルロス、測定機材偏差誤差を含みます。

※測定機材は校正していませんので、精度を保証するものではありません。
 あくまでもアマチュアレベル参考値です。
※測定機材は出品対象ではありません。

暫定放熱板として、取り付けアルミ板をそのまま残しています。(画像参照)

動作チェック時に、誤接続しないように、線材にラベルを付けました。
これはご使用時の利便性の為に、そのまま残します。(画像参照)

取り外し品で、経年変化に伴う傷、汚れ、クスミがあります。
詳細は確認していませんので、現状優先とします。
状態は画像にてご確認下さい。

あくまでも、中古現状渡しジャンク品となります。
ノークレーム&ノーリターンでお願いします。
※画像内のスケール、測定機材は出品対象ではありません。

バンド切り換え制御が不要な、超ワイドバンドなYIG発振器です。
3.2GHzから19.5GHzまで連続発振出来て、しかも出力も+20dBm程度出ます。
マイクロウェーブ信号源として、工作、製作、試作、測定、実験、研究等に、
ご利用いかがでしょうか。

発送は、ヤマト宅急便(60サイズ)着払いで行ないますので、
落札金額のみをご入金下さい。
※梱包時点での手持ち箱を使用します。
着払い送料は、落札者様ご負担でお願いします。
送料は落札者様にてお調べ願います。発送地は東京都です。
なお、
 お届け日
 時間(午前中/14~16時/16~18時/18~20時/19~21時)
指定が可能ですので、落札後、ご入金前に、取引ナビにてお知らせ下さい。
お取引に際しまして・全てノークレーム&ノーリターンが前提でお願いします。
・送付方法の変更はお受け出来ません。
・落札後、3日(72時間)以内に初回連絡をお願いします。
・受領後、3日(72時間)以内に受領連絡をお願いします。
・商品の発送は、ご入金確認後の週末になる場合がございます。
 商品発送を急がれる方は、ご遠慮下さい。対応出来ません。
・ご質問に、迅速にお答え出来ない場合もございます。
・梱包材、緩衝材は再利用品を使用します。
・領収書の発行は出来ません。
・落札後のアフターサポートは対応しておりません。
以上を、ご納得&ご同意頂ける方のみ、入札をご検討下さい。
送付方法ヤマト宅急便着払い
支払方法Yahoo!かんたん決済(詳細
その他①落札後、領収書を希望される方がいらっしゃいますが、
 領収書は発行出来ませんので、ご了解下さい。
②ヤマト宅急便で、日時指定のご希望は、
 必ずお支払い前にご連絡下さい。
 お支払い後では、発送済みの場合がございます。
③最近、海外へそのまま転送する為、海外輸送に耐える梱包を
 要求される方がいらっしゃいますが、対応出来ません。
 国内輸送を前提とした常識的な梱包を行います。
④同梱は同日落札分のみ対応します。
 翌日以降の追加落札分の同梱要求は、対応出来ません。
 送付先のご連絡を頂きましたら、すぐに梱包を行います。
よろしくお願い致します。

この商品説明は オークション落札相場サイト「オークファン」出品テンプレート で作成されています。
Powered by aucfan.com

Please log in before asking questions
Question list
All replies from original sellers (total number of questions: items)
After the seller responds, the original page will display the question
Product Price JPY
Japanese Consumption Tax(10%) JPY

A 10% consumption tax is applied to goods and services in Japan. The price may include the tax or it may be added separately. Please check the price details when ordering.

Note: This is a domestic sales tax applied within Japan.

Japan Local Shipping Fee JPY Japan Local Shipping Fee Reference
Product Weight KG The maximum weight limit is 30 kg
International Shipping Methods
Proxy bidding and purchasing services are becoming increasingly convenient. However, overseas shopping carries certain risks and issues. To reduce these risks and enhance shopping safety, please be sure to read the following information:

1. International Shipping

   Air Freight: If the item status is not confirmed within two days after the arrival notice, any customer complaints cannot be addressed with the seller.

2. After Receiving the Product

Please confirm and inspect the product as soon as possible to ensure that the product specifications, quantity, accessories, and description are correct

If, unfortunately, there are any issues, you can refer to the following examples on how to report related product problems:
1. Example of missing product information
2. Example of product not matching provided information
3. Example of damaged product information

Important Notes: 1. If the seller is unwilling to ship overseas or is unaware that the product will be shipped overseas, the international shipping cost for returns or exchanges will need to be borne by the member. You may refer to the EMS e-Express fee inquiry from the post office. If it involves alcoholic beverages or items that affect flight safety, the post office cannot be used for shipment, and only DHL can be used to ship back to Japan.
2. During the product complaint handling period, please retain the complete outer packaging of the product (including the shipping label information), and refrain from attempting any repairs or altering the original condition. Any modifications may result in the inability to process the case.

3. After Inspecting the Product

After receiving and inspecting the item, if you have any questions, it is recommended to contact Letao within 2 hours. Here are some reminders:

1. Please do not unpack, use or repair the received item yourself, and be sure to keep the original packaging to facilitate subsequent handling of related matters, so as to avoid changes to the item that may cause the seller to be unwilling to process.

2. You can call customer service, and the customer service will leave a message for you as below. Please provide the following information:
"Hello, we will first help you establish a complaint case for Product ID: _______ .But we need you to 2-3 clear photos of the product issue, including photos of the product problem, product packaging, shipping details slip, and outer box. Send them to service@letao.my and inform us of your desired resolution (failing to provide this may result in an inability to process subsequent matters). After sending the email, notify us in the customer service message. We will confirm with the seller as soon as possible. and if there are any related questions, we will contact you through the customer service message. Thank you for your cooperation."

Please provide:
1. "Product ID"
2. Photo of the "Delivery Note" (if any)
3. Photos of the outer box (including inner and outer packaging)
4. Photos of the product (Please include relevant descriptions to help us confirm with the seller)

Important Notes:
1. Do not include foreign text or other products in the background of the image.
2. Please keep the complete product packaging (including the shipping label information), and refrain from repairing or altering the original condition on your own, as any changes may result in the case being unable to be processed.
3. Please provide the relevant information within 48 hours to avoid missing the golden hour for reflection and causing situations that cannot be handled.
4. Due to 99% of Japanese sellers being unwilling or unaware of shipping goods overseas, if a seller is willing to handle the issue, the goods must be sent back to Japan, and the international shipping costs incurred must be borne by the member. Letao will use postal EMS international express to send the goods back to Japan.
5. As the goods are purchased from overseas, it may take approximately one to two weeks to complete the relevant processing procedures when issues arise with the goods. Please be reminded that you can inquire about the approximate cost through the EMS service at the post office.

4. FAQ

1. Issue of Authenticity: If antique or branded goods are found to be counterfeit upon receipt, clear photos showing the differences between the genuine product and the imitation must be provided as evidence. If unable to provide relevant proof, assistance can be sought to find a third-party reputable organization for a premium authentication service .
2. Leaking Iron Teapot: If an antique iron teapot is leaking, please take clear photos of the leaking area and provide them.
3. Transport Damage: If the goods are damaged during international shipping (to the pickup point), you need to provide photos of the outer packaging of the parcel and clear photos of the damaged goods' outer packaging.

※ Note: Photos provided to sellers should not contain any foreign-related information.
You may also like
    Seller products
    Excite Translate
    Add to watchlist and notes
    Product name: 【HPマイクロ波】TELEDYNE MICROWAVE社 FS2334 Multi-Octave YIG発振器 実測3.2GHz-19.5GHz +20dBm +15V単電源 動作簡易確認済 ジャンク品
    Notes:
    Customer service hours:
    • Monday to Friday 10:00-18:00
    Customer service hotline:
    Customer Service Email: service@letao.my